Products

The 45 degree street elbow is ideal for connecting 2 pipe sections without reducing flow efficiency  1-1/2" slip fits over flexible or rigid pipe w...

1 Amp Pilot Duty T-Stat, 120V, 45” Cord, 2.25” x .312” Probe for Pool heaters   Always make make sure that the thermostat is installed with the bul...

1 Amp Pilot Duty T-Stat, 120V, 45” Cord, 2.25” x .312” Probe for Pool heaters   Always make make sure that the thermostat is installed with the bul...

One speed  power cord for a single speed pump or blower, The cord is 4' long and features  3 wires -  Black, White and Green with spade connectors...

Waterway Pump union for the Waterway Tiny Might pumps. 1" union threads with 1" slip  Inside Diameter  1-7/8" Compatible with Waterway Tiny Might...

The reducing bush is used to reduce the size of one pipe to the other, in this case from a 2.5" pipe to 2"

1 Horsepower Impeller for the following Pumps: Waterway E-Series Center Discharge Pumps Waterway Spa Flo II Pumps Waterway Hi-Flo II Side Discharg...

The 1.5" 90 degree elbow is used for adding a bend on hot tub plumbing when using rigid ABS or flexible PVC pipe.  For 1.5" Plumbing Made from ABS...

The 1.5" flat gasket with the embedded O Ring is used for the union connection to the pump or heater tube on hot tub systems

The Magicmend Pipe extender is very useful for extending flex hose or rigid pipe on hot tub plumbing or making a repair when the plumbing is very ...

Praher multi-piece knife valve, 1.5" slip x 1.5" slip   Ships assembled, Parts to the valve are: 2 - 1.5" sockets, both sides with slip fitting 1...

The coupling has a 1.5" diameter and allows two 1.5" pipes to be joined together. This can be used to make a repair in leaking or broken pipe work...

The Waterway 1.5" tailpiece and 2" spigot fitting will connect a 1.5" union and a 2" pipe or 2" union

Waterway Pump union for the Waterway Tiny Might pumps. 1.5" union threads with 1.5" slip  Compatible with Waterway 1.5" Pumps Made with durable ...

The 1.5" x 2" threaded adapter can be used to convert 1.5" pump connections to 2" unions

120v P1 2 speed cable for IN.XE spa pack systems

Discontinued Single pole rated at 25 amps with temperature rating set at 121°F.   Always make make sure that the thermostat is installed with the b...

The SC15 Amp buss fuse is used a the main fuse to protect the spa pack from electrical issues. Product Height: 1.62 In Amperage Rating: 15 A Inter...

The Sand filter manifold is used to enable the filtration of the pool water through sand media. By pumping the pool water through the Laterals at t...

Single pole rated at 25 amps with temperature rating set at 121°F.   Always make make sure that the thermostat is installed with the bulb part in a...

The Sand filter manifold is used to enable the filtration of the pool water through sand media. By pumping the pool water through the Laterals at t...

  2 speed cord for running a hot tub pump or blower. The cord is 4' long and has 4 wires - Red, Black, White and Green with spade connectors on one...